Photoshop Lady

Your Favourite Photoshop Tutorials in One Place

Realistic Torch Light Creation in Photoshop

Under


- Photoshop is recommended for this tutorial -

 
20 Best Places to Submit Your Photoshop Tutorials

20 Best Places to Submit Your Photoshop Tutorials

When you have created your own amazing Photoshop tutorials, I am sure you would like to spread the world by submitting them to the Photoshop tutorials sites. However, many of the Photoshop tutorials sites are inactive, and have not been updated for a long time. Only some of the Photoshop tutorials sites can drive you large amount of traffic.

We have selected the following 20 Best Places to Submit Your Photoshop Tutorials. They can gives you nice amount of traffic and a good quality of valid linkback. You can find the “Direct Submission Link” on each of the Photoshop tutorials sites we mentioned. We hope it can make your life easier.

—————- Direct Submission Link —————-

Pixel2Life

Pixel2Life

Pixel2Life is probably the biggest tutorial search engine on the web, covering the most subjects as well.

—————- Direct Submission Link —————-

Good-Tutorials

Good-Tutorials

Good-Tutorials is the largest source of tutorials on the web today. It has been featured on the BBC, SkyNews, TechTV (now G4), in the British magazine iCreate, PC World, and has been linked to by thousands of sites, blogs and forums. Since its start in 2002, it has been designed, coded, and loved by Zach Holman.

—————- Direct Submission Link —————-

Design Bump

Design Bump

Design Bump isn’t just a tutorial website, rather a general design resources depository. Covering subjects such as: Web Design, Tutorials, Flash, Business, Programming, WordPress and much more!

—————- Direct Submission Link —————-

Psdtuts+

test
Psdtuts+ is a blog/Photoshop site made to house and showcase some of the best Photoshop tutorials around. We publish tutorials that not only produce great graphics and effects, but explain the techniques behind them in a friendly, approachable manner.

—————- Direct Submission Link —————-

PSLover

PSLover

One of the bigger Photoshop tutorial databases on the web, PSLover has been arond for quite a while now and is still going strong.

—————- Direct Submission Link —————-

Tutorialvault.net

Tutorialvault.net

Tutorialvault.net focuses on collecting and archiving the best graphic and coding tutorials on the internet. While a large part of our database features tutorials from the Adobe Family of programs, we also have a vast list of CSS, PHP and 3D tutorials.

—————- Direct Submission Link —————-

TutorialsGarden

TutorialsGarden

Covering many subjects extensively, such as: 3D Studio Max, CSS, Fireworks, Flash, Gimp, Photoshop and more.

—————- Direct Submission Link —————-

Tutorial Outpost

Tutorial Outpost

Tutorial Outpost was started in November 2003 by Josh Pigford initially as a project to learn web development. It quickly turned in to much more as being one of the first major tutorial portals around. It has expanded in to many more categories past the initial Photoshop Tutorials and is now visited by more than 125,000 people each and every month.

—————- Direct Submission Link —————-

Tutorials Expert

Tutorials Expert

Covering subjects of: 2D graphics, 3D graphics, audio editing, business applications, databases and more.

—————- Direct Submission Link —————-

Photoshop Roadmap

Photoshop Roadmap

A brilliant collection of Photoshop tutorials, brushes, resources and plenty more.

—————- Direct Submission Link —————-

FSTutorials

FSTutorials

A beautiful depository for Photoshop tutorials, including the following categories: basics, buttons, color effects, designing, drawing, photo effects, special effects, text effects, textures and web graphics.

—————- Direct Submission Link —————-

TutorialMix

TutorialMix

Covering topics on the following: 3DS Max, Photoshop, ASP, Cinema 4D, Dreamweaver, Illustrator and many more.

—————- Direct Submission Link —————-

Tutorial-Index

Tutorial-Index

One of the younger but larger collections of tutorials on the web. Tutorial-Index covers the following subjects: Photoshop, Flash, PHP, Unix, Javascript and many more.

—————- Direct Submission Link —————-

TutorialKit

TutorialKit

Covering many popular categories, including: Photo Correction, Special Effects, Text Effects, 3D Effects, Web Layouts and Graphic Design.

—————- Direct Submission Link —————-

Tutorialized

Tutorialized

One of the oldest tutorial databases, Tutorialized has been around since the beginning.

—————- Direct Submission Link —————-

Total Tutorials

Total Tutorials

Covering tutorials on Photoshop, 3D Studio Max and Cinema 4D, Total Tutorials has been in the game for a very long time.

—————- Direct Submission Link —————-

Tutorial Center

Tutorial Center

Just some of the categories that Tutorial Center covers: Photoshop, Illustrator, InDesign, Blender, CSS and more.

—————- Direct Submission Link —————-

Kaoz-Tutorials

Kaoz-Tutorials

Covering the following subjects in some depth: Photoshop, Flash, HTML and CSS, Javascript and PHP.

—————- Direct Submission Link —————-

CG Links

CG Links

CG Links covers 3D & 2D files, tutorials, books, plug-ins and textures

—————- Direct Submission Link —————-

CGTutorials.com

CGTutorials.com

CG Tutorials is becoming one of the fastest growing directories of computer graphics tutorials. We seek to index all computer graphics tutorials in order to give them publicity and to give everyone an easy way to find the tutorial they seek.

Premium Custom Design Service

Premium Custom Design Service

thumbnail_retouching-1373021169

Character & Mascot Logo Design

Andy is a Game Graphic Designer, Illustrator, Mascot Designer. You can get some great Character/Mascot Logo Design for an affordable price.

4 days with 2 revisions

($200) View Service

thumbnail_retouching-1373021169

Professional Landing Page Design with SEO

I will design your one page website with an eye for detail and focus on placing the elements in the right place for maximum conversion. I’m sure the end result will be to your satisfaction.

7 days with 5 revisions

($145) View Service

thumbnail_retouching-1373021169

Professional iOS App Icon

I’ll help you make an icon for your application gorgeous!I provide high quality designs. It includes 1 PSD file and PNG package with the size 1024, 512, 144, 114, 72, 58, 57, 50, 29px.

4 days with 3 revisions

($250) View Service

thumbnail_retouching-1373021169

Professional Logo Design + Corporate Identity Manual

You will get Vector logo in Ai, EPS, PSD and JPG formats, 4 color versions (full color positive, full color negative, one color positive, one color negative), 8 page Corporate Identity Guide PDF (usage guidelines, CMYK/RGB colors, Typography, etc).

3 days with 2 revisions

($180) View Service

thumbnail_retouching-1373021169

Professional Logo Design

You will get 3 concepts of logos, Set revisions on selected logo, 100% vector logo scalable to any size without loosing resolution, Different file formats for web and print use such as .ai, .eps, .psd, .pdf, jpg, transparent .png

1 day with 5 revisions

($50) View Service

thumbnail_retouching-1373021169

Professional Badges (4 Badges)

You will get 3 concepts of logos, Set revisions on selected logo, 100% vector logo scalable to any size without loosing resolution, Different file formats for web and print use such as .ai, .eps, .psd, .pdf, jpg, transparent .png

4 days with 2 revisions

($100) View Service

thumbnail_retouching-1373021169

Professional and Unique Business Card Design

You will get a professional, good looking business card, front and back, Ready to print business card! I will provide them in photoshop layered format or any other file format you need.

2 days with 3 revisions

($30) View Service

thumbnail_retouching-1373021169

Modern and Clear Infographic

You will get a clean and clear infographics. Everytime build on great font and first look understandable. With your data I provide sketches and after you reconsideration provide a final graphics. I deliver any size of .png and .psd file.

3 days with 2 revisions

($195) View Service

thumbnail_retouching-1373021169

Modern One Page Design

One page website design work i am doing is using 960 grid system format, so the design will be responsive made. Deliverables would be in .psd format and on your request some icons or shapes i use can be done vectorial.

2 days with 4 revisions

($195) View Service

thumbnail_retouching-1373021169

Logo & Brand Identity Design

My process is clean and quick, emails are responded to nearly immediately and revisions are knocked out in no time. Deliverables can be handed off in any file type, but always start in a fully scalable, vector format that can work on everything from a button to a bus.

4 days with 3 revisions

($300) View Service

Creepy Grey Metal Skull by Salazar

Creepy Grey Metal Skull by Salazar

Skull” is Colombian digital artist Santiago Betancur Salazar’s last project. Salazar has his own website, which exhibits his fabulous works with different styles. The reason why he presents his “Skull” here is he loves skull, so he shares his works.

Photos belows generally show Salazar’s working process with “Skull” by Photoshop. Skull itself is terrific enough, and Salazar created this “Skull” with creepy grey metal effects. The exquisite vein and muscle details prove Salazar’s skills and attitude. No matter seeing from the front or from the profile, Salazar’s Skull is naturally mixed together with its background, a grey metal skull emerging from its gray tenacious and unbreakable background.

Skull-01
Skull-02
Skull-03
Skull-04
Skull-05

Top 10 Icon Design Tutorials in Photoshop

Top 10 Icon Design Tutorials in Photoshop

Sometimes, you may find it difficult to look for some of the highest quality photoshop tutorials using search engines. As most of time, almost all tutorials would label themselves to be good, high quality or even the best photoshop tutorial you can find. When searching through all these tutorials, your time is wasted.

In order to save your time, Photoshop Lady come up with Top 10 Icon Design Tutorials in Photoshop. These are selected from our Photoshop users and readers.

About Photoshop Lady

About Photoshop Lady

Photoshop Lady aims to collect the best and free photoshop tutorials around the internet. All of the high quality photoshop tutorials are categorized into 3D Effect, Abstract Effect, Drawing Effect, Photo Effect, Text Effect, Texture & Patterns and User Interface Design.

You can see the rating and number of views for each Photoshop tutorials.You can add your favorite photoshop tutorials simply by clicking “Add to Favorite”, so that you can revisit them at any time. You can also drag your favorite photoshop tutorials into the bin if you do not need them anymore.

Photoshop Lady is updated daily. Please make sure you have subscribe to our RSS Feed as well, so that you can receive new high quality photoshop tutorials everyday. We are very welcome you to submit your own photoshop tutorials to us as well. There will be more features coming soon. Please stay tuned.

How To Paint A Poe & Pluton Cartoon Portrait in Photoshop

How To Paint A Poe & Pluton Cartoon Portrait in Photoshop

Final Image Preview

On this tutorial we will make a Poe and Pluton cartoon portrait, using custom brushes created by ourselves

Tutorial Assets

Watercolor Texture

Paper Texture

Step 1

Open a new document of 1800px high and 1200px wide. First, we will set up what will be the brush that we are going to use to draw the general lines, from the Brush Selector pick the brush no.30, Hard Round, and set its opacity to 75% and Flow to 35%.

Step 2

Now, on the Brush Presets menu (F5), make the following settings, check the Shape Dynamics and Transfer boxes, and adjust Spacing to 1%. You can see the final shape of the Brush.

Step 3

Create a new layer “Poe”, and leave its default setting. With the Brush we created, start drawing the face, neck and shoulders, adjust the size to get thicker strokes on the garb, and thinner strokes for the face, hair, and neck. Draw flowing strokes, without taking much care on the detail, afterwards use the Erase Tool to remove the unwanted parts of the strokes. Also use the Erase Tool to create the eye’s brights.

Step 4

Next, on a new layer “Body & Pluton”, start drawing the Poe’s lower body and Pluton. On the picture you can see that the strokes just establish the main forms, using stains instead of precise lines. Again, use the Erase Tool to remove certain areas as Pluton’s eyes and Poe’s fingers.

Step 5

We will add an extra layer “Lower Body”, where we will paint the area between Poe and Pluton. After, this will be useful for split the two elements and avoid to mix them together. Notice the erased area beside the Pluton’s head.

Step 6

Now, let’s start to create our custom watercolor brush. Use a new layer to paint two brush strokes as shown, using the Soft Round Brush. Notice that they aren’t symmetrical, this will be better for the final result. Next, go to Edit > Define Brush, we can name it “watercolor”, now it is ready on the Brush List for being used.

Step 7

Next, on the Brush Presets (F5), start setting the following adjustments, check the Shape Dynamics box, and adjust Spacing to 1%.

Step 8

Check the Scattering box and adjust its settings as shown. The same with the Transfer option. You can see how the brush shape changes on the display.

Step 9

Finally check the Dual Brush box and select the brush number 45 with the following settings. Now we have our watercolor brush ready for be used.

Step 10

Pick the Smudge Tool, and with the watercolor brush, smudge the painted layers we created before. Adjust the Strength to get different results.

Step 11

Create a new layer “Details” and with a Hard Round Brush paint the fine details as cat’s whiskers and some loose hairs. Next, with the Smudge Tool, and a Soft Round Brush selected, drag some portions of black to create more cat fur, with a small brush size selected.

Step 12

Now, we will create another textured brush. Using the brush number 30 as a base, apply the following settings on the Space Dynamics and Scattering sliders.

Step 13

Following with the Transfer and Dual Box adjustments.

Step 14

Picking the Eraser Tool, and the brush we just create selected, erase some edges of Poe’s suit to imitate a dry brush watercolor effect.

Step 15

Next, create a new layer “Pluton’s Eyes”, and on it draw the necessary brush strokes to draw the eye’s pupil, yes, remember that it only has one…and the eye’s shadows. With white color, paint the tusk and the eye’s brights.

Step 16

For the Poe’s face shadows, select the brush number 30 and adjust it as shown.

Step 17

For the Poe’s face shadows, create a new layer “Poe Face Shadows”, set its Blending Mode to Normal and 60% opacity. Start painting the shadows as cheeks, chin, eye sockets, etc. Overlap more than one brush stroke to achieve darker tones.

Step 18

Let’s start with the background, create a new layer “Background Color”, just bellow of the layer we created before. On it, with the Gradient Tool, select a brownish tone and make a gradient from bottom to upper zone as shown.

Step 19

Next, to start making the lights, create a new layer “Highlights”, with the brush we created on step 16, select white color, and start painting the lights, I chose a cenital light, so it impacts on the upper areas of volumes as shown.


Step 20

To add some vignetting on the background, go to Filters > Lens Correction, and on the Custom tab you will find out the Vignette Amount slider, a quantity of -40 will be ok.

Step 21

To create the paper texture, we will add a real paper image. Create a new layer “Paper Texture”, set its Blending Mode to Multiply and 30% Opacity. Next, Copy and Paste the paper image on that layer.

Step 22

Next, we will add an spotlight just behind Poe. Create a new layer “Spotlight”, set its Blending Mode to Lighten and 50% Opacity. With the Elliptical Marquee Tool, create a circle, place it behind the Poe’s shoulders and fill it with withe color, next go to Filter > Blur > Gaussian Bluer, and blur its edges. To avoid that the white overlap to Poe, create a Layer Mask and hide the unwanted areas.

Step 23

Continuing adding textures, create a new layer “Ink Stain”, set its Blending Mode to Lighten and 80% Opacity. On it, place one of the ink textures you will find on the assets as shown.

Step 24

More textures…Create a new layer “Aged Texture”, set its Blending Mode to Soft Light, and 80% Opacity. On it place again one of the ink textures from the assets to give an aged finish to the image. Notice that all textures are placed bellow Poe & Pluton’s layers, to keep them clean on other plane.

Step 25

Now the image is almost finished, create a new Group and put in it all the layers. Next save the document as .JPG, open it, and place this file on top.

Step 26

With the Dodge Tool, light up a bit some areas to create more contrast. The watercolor brush will be a good choice to do that.

Step 27

Again, let’s add some more vignetting, go to Filters > Lens Correction, and adjust the Amount slider to -30.

Step 28

Finally, to add some noise to the image, create a new layer “Noise”, set its Blending Mode to Multiply, and fill it (Shift + F5) with white color. Next, go to Filters > Noise > Add Noise, a quantity between 8 and 10 will work.

Step 29

And this is the final result

How to Create Product Labels in Photoshop

How to Create Product Labels in Photoshop

Hello Everyone here we have a design/illustration tutorial. We are working on a label for a Micro brew beer.

Step 1

First of all, I will go through all the process and how I came up with a rough sketch of what my character would look like.

Here is a sketch on paper with a permanent marker line art. Scan your work and keep the file on a 300dpi resolution. The bigger the better, that way scaling down works best! The sketch was done on red so we could easily separate the line art from the sketch. How? Super easy! At first label your layer by double clicking on it.

Step 2

You can either do it by ctrl+click on PC or command+click on MAC and select your sketch layer, once you have the marching ants you go to the channels tab and click on your red channel.

You copy that channel layer ctrl+c on PC command+c on MAC. And you click again on you composite channel (RGB) to select them all. You go back to your layers panel and paste your red channel as a layer ctrl+v on PC or command+v on MAC. Name your new layer LINE ART.

Step 3

Let’s go to the levels adjustment ctrl+L on PC or command+l o MAC and tweak your sliders so you get a clean black and white image. Try and get all the grays out. Easy! Now to get rid of the white and keep a clean lien art! OK so we can get rid of that first sketch of ours or keep it if you like to have the history. I personally like to have all my layers at the end and see how much the image changed from beginning to end. (I know many of your might be dying about the left eye of the ninja but I’m getting there!) Ok, now we get rid of the white background. Hide all your layers but your line art by doing alt+click on PC or optn+click on MAC over the little eye icon on your layer. We open the blending options of our LINE ART layer by double clicking on the space next to the name or by simply going to your “FX” button.

After that, selecting blending options. There you’ll have 3 blocks and the third one is the one we want: “Blend If: Gray” Here you want to slide the white triangle to the left until the white is totally gone! Click OK when done.

Step 4

Great! Now we need to lock those changes so we need to press ctrl+click on PC or command+click on MAC on the create new layer icon so that the new layer appears under our line art layer. Then select both and press ctrl+e on PC or command+e on MAC to merge both layers onto one and keep it in transparency. Awesome! Now we can finally duplicate that eye and get ready to color it.

Step 5

Once OK, we can go to the painting process. Create a new layer under the line art and layout all your flat colors.

Step 6

it is time to work on your lights and shadows. Use brighter tones of the same layout colors for the highlights and darker for your shadows. Once you finish, you should have something like this:

Step 7

Now we can take this great drawing to the next level. We are going to color the line art. What? my precious clean clack lines? yes! to do this you want to lock the transparency on the line art by clicking on this icon:

Now it is coloring time. Choose the darkest color of the shadow per section of your character. Let’s say you are working on the hoodie of the ninja. Select your darkest value with the eyedropper tool and go a little darker than that. Why? just so that the line art doesn’t blend with the shadows. Once you have that color start brushing in! Your final illustration would look a little like this:

Step 8

Since you have done with the character. It is time to work on the label. Setup your size and resolution on a new document. Remember 300+dpi is best if you want to print. Firstly, we set the background color in green. Press alt+backspace on PC or option+backspace on MAC to fill the layer with your choice of color.

Step 9

With a soft brush ,the dodge and the burn tool you need to work out some shadows and lights. Then choose greens with the same dodge and burn but with a textured brush as below.

Step 10

Now we go to work on the starburst effect. Create a new layer; and then,draw line and dark gray rectangles like this:

Step 11

Go to the main menu and select “Filters” then “Distort” and lastly “Polar Coordinates” and use RECTANGULAR TO POLAR. BAM! Starburst. Now lower the opacity to about 50% and change the blend mode to “Overlay”.

Step 12

It’s time for the Ovals. Firstly, we create our oval in a dark green. And then apply the following layer styles and apply the following settings as below:

Step 13

We duplicate the layer by pressing ctrl+j on PC or command+j on MAC. Then change the color to a darker green and adjust the stroke settings to:

And then, add your illustration layer

Apply the following outer glow layer style to make it POP:

Step 14

And then, we can add logo, flavor and text into the recipe!

Use the same idea to create the template as this:

Download PSD Source File

The Evolution of Photoshop Infographic

The Evolution of Photoshop Infographic

In 1987, Thomas Knoll, a PhD student at the University of Michigan began writing a program on his Macintosh Plus to display grayscale images on a monochrome display. This program, called Display, caught the attention of his brother John Knoll, an Industrial Light & Magic employee, who recommended Thomas turn it into a fully-fledged image editing program. Thomas took a six month break from his studies in 1988 to collaborate with his brother on the program, which had been renamed ImagePro. Later that year, Thomas renamed his program Photoshop.

During this time, John traveled to Silicon Valley and gave a demonstration of the program to engineers at Apple and Russell Brown, art director at Adobe. Both showings were successful, and Adobe decided to purchase the license to distribute in September 1988. While John worked on plug-ins in California, Thomas remained in Ann Arbor writing program code. Photoshop 1.0 was released in 1990 for Macintosh exclusively.

That’s the early history of Photoshop. Here we have created The Evolution of Photoshop Infographic, in order to show you the entire history of Photoshop up until now.

Click to enlarge.

evolution-photoshop

About the Author

Dona Collins is an infographic artist, blogger and financial writer at CreditLoan.com. When she is free you can find her on twitter and other times you can find her writing articles for creditloan blog.