Your Favourite Photoshop Tutorials in One Place
- Photoshop is recommended for this tutorial -
Posters are great avenues to showcase one’s creativity. They allow artists to express themselves in countless ways. Posters are designed to be both eye-catching and convey information. The followings will show you some sophisticated artworks printed on quality posters which can admire yourself.
Webydo’s 50K Community of Professional Designers Creating Their Websites Code-Free, Join The Revolution
Are you looking to kick start your website design by professional developers? Is there something that is getting in the way or preventing you from starting you from starting your website design project? Is the cost involved too high for you or your clients to hire a developer? These might be some of the questions on the back of your mind whenembark on a new project. Well, fear not, as Webydo is leading the way in professional online website creators to help designers create and publish their websites code-free. You might be thinking that it is similar to those sites offering website designing. Well, it’s not, Webydo is a well-known online design studio which has provided their community of designers a way around the coding so there is no need to hire a developer. Webydo offers you a diversified range of options having customized CMS (Content Management System) at your disposal and entire list of professional features to help kick start your business.
Getting started can sometimes be the most challenging, but Webydo provides you with three clear paths to embark on. First, if you already have a vision for your design you can chose the blank canvas and spill your creative juices out onto this canvas. The other options are to take one of the basic layout options or choose a readymade inspirational design. All of these are completely customizable as well for you to make them your own.Once you have gone through the process of choosing a design, and when you feel satisfied, the site will make that virtual website into a living reality for your business and/or recreation purposes. After you create a website, you can see it live on one the Webydo subdomain, and test it out on the web, share with clients and make your edits right then and there.
CEO of Webydo, Shmulik Grizim believes that they can bring any design to life without wasting time on writing a single line of code. The very same site has also achieved the milestone of breaking previous habits of website designing and complex coding. It has surely provided a feasible detour away from all such worries. The most remarkable feature of it includes the drag and drop option. Webydo’s professional website design studio allows you to import your favorite designs, media, photos and much more to your under-developed webpage using Webydo’s online canvas where you can assemble all the elements the way you like it. This gives you the utmost liberty of website design for each and every pixel on your webpage.
Do you want to insert any value-adding feature? Not a problem! The technical features of websites; like, blogging features propped up with various forms and Google map integration is more than just a need for any business. The popularity of this B2B website design platform is reflected from the ever-increasing influx of 50,000+ designer community within Webydo. These professional designers also helping to craft the future of the platform by regularly submitting new feature suggestions and voting on what should be added next right on the Participate page.
Webydo is surely a unique blend of beautifully crafted webpages and endless marketing horizons for promoting a bold perspective of your very own business. Webydo has a number of qualified and expert designers which have the experience of developing numerous websites and an ability to convert them into a success. Design a website can be quite a tedious and time consuming process and this is Webydo is so remarkable, because they have provided a professional design platform for creative professionals to take full control of their design projects from creating, to publishing and managing. By allowing designers to rebrand the CMS with their logo or send branded invoices, the platform functions more efficiently for the designers at work. So, if you are looking for having better marketing prospects, you would surely contact us for crafting your very own pathway towards success.
This article is proudly sponsored & presented by Webydo’s designer’s community.
In this tutorial, we’re going to teach you how to use simple elements at your disposal and combine them to create an eye catching digital illustration. We will work through techniques like lighting placement, clipping masks, shadows and more. If you want to improve your Illustration skills and composition then this tutorial is for you.
Completion Time: 1 hour 30 mins
Stock: Beauty – http://www.istockphoto.com/stock-photo-3736351-beauty.php
Open up Photoshop and import your stock photo, I used Beauty From IstockPhoto in this case. Once you have the stock photo opened up, duplicate the layer by right clicking on the background layer and hitting duplicate layer (CTRL + J). Its always good to have a copy of your original present in your composition.
Now let’s add a Image adjustment, go up to Layer>New Adjustment Layer>Gradient Map and use the default Gradient Black to White, now drop the opacity of the layer down to 52% and set the blending mode to Luminosity.
Go up to Layer>New Fill Layer>Gradient and hit the OK button and choose a gradient that runs Dark Blue(#0e272f) to Light Blue(#5993a4) Now set the Blending mode of that layer to Screen and erase parts of the layer that you do not want.
Now get yourself a Bubble C4D that you like and import it into the image, Position it where you want it and change the Blending mode to Linear Dodge. I positioned the Bubble C4D on the Bottom part of her shoulder.
Now go up to Layer>New Adjustment Layer>Brightness and Contrast – Set your Brightness to +27 and your contrast to +39 and hit OK.
After setting up a new adjustment layer, create a new layer by going to Layer>New>Layer (CTRL + SHIFT + N) and Fill it with Black(#000000) set the blending options of the layer to Linear Dodge and grab your Brush Tool from your toolbar. I used a 500px sizes brush with bright orange(#ff6b00) and Faded Red(#7f1618) to Create two large lighting circles. I then scaled down the brush and used a soft white brush to just add some lighting depth to the circles and this is what it looked like without the blending mode active.
We are going to use this step to add a few adjustment layers to our piece. Firstly go up to Layer>New Adjustment Layer>Gradient Map and choose the stock Purple(#290a59) to Orange(#ff7c00) Gradient and set the blending mode to Screen and the Fill to 13%.
Now go up to Layer>New Adjustment Layer>Curves bend the curve slightly down, you will have to play around with the curves to get your desired depth on the image itself. Now go up to Layer>New Adjustment Layer>Levels and set your levels to 6 – 1.13 – 253
After setting up those adjustment layers, you should have the outcome show below:
Now we will create a new layer by going to Layer>New>Layer and then grab your gradient tool, (Shift + G) then set your gradient colors: Orange(#ff7c00) to Pink(#cc0033) and drag it from the top left hand corner to the right bottom corner and then set your blending mode to Soft Light and your Opacity to 30%. Be sure to erase any part of the gradient you don’t like.
The next part I used a Lighting Image that I download from Barton Damer that he shared with us last year, but he has since removed the pack for download and I am not able to share the full image with you guys, sorry for that. What I would have done is get hold of some long exposure photos that either you have taken or bought from somewhere. I integrated the image into the composition and set the blending mode to Linear Dodge and the opacity at 87%
Now you are going to create a scatter brush, choose your brush tool (B) and choose a reasonably small size brush in the range of 2px – 5px and a Hardness of 100% and then go to Window>Brushes now check out the settings in the images below.
After setting up your brush create a new layer by going to Layer>New>Layer (Ctrl + Shift + N) and then choose white as your foreground color and brush along the lines of your previous layer, the lighting effect/exposure shot. You should have something like this.
In this step we are going to use parts of the image itself to create a new element to use, Firstly create a new layer by going to Layer>New>Layer and then go to Image>Apply Image (Ctrl + Shift + Alt + E) now grab your marquee tool and draw a small rectangle on her face, you can choose where, but I chose across her nose and eye and then hit (Ctrl + Shift + C) That merge copies the current selection.
Now create a New Layer by going to Layer>New>Layer (Ctrl + Shift + N) and then go up to Edit>Paste this will paste the copied piece in a new layer. Now go to Edit>Free Transform (Ctrl + T) and rotate the selection 45 Degrees.
Now set the Blending Mode to Soft Light and Move it down into the Lighting Area, I copied the selection twice and just moved them around on top of each other to create a vibrant feel. I also erased the parts that I don’t like to blend it in better.
Now create a new layer by going to Layer>New>Layer and fill that layer with black(#000000) now set the blending mode of that layer to Linear Dodge and Grab your Brush tool, use a moderate size tool of about 500px with hardness set to 0%. Use a Dark Yellow(#f38d30) as your foreground color and brush in the bottom left corner of the piece. Remember to brush on the same layer that you filled with black. Now with the same layer selected go up to Filter>Blur>Radial Blur and use the zoom effect at 100% you should have something like this.
Next I used a Smoke Image that I got from SXC – http://www.sxc.hu/browse.phtml?f=view&id=788872 and imported it into the composition. I then set the blending mode to Linear Dodge and set the Opacity to 27% I then Used Free Transform Edit>Free Transform to rotate the image to the left a bit and move it down into the comp to compliment the flushed lighting at the bottom.
I then created a new layer Layer>New>Layer and filled it with black(#000000) I then went to Filter>Noise>Add Noise and set it to 33% Uniform and Monochromatic noise and hit OK. I then went to Image>Adjustments>Levels and used the settings below:
Now set the Blending Mode of the layer to Linear Dodge and the Opacity to 37% and erase the areas over her face and the areas you don’t want. You should have something like this.
In this step we will be leveling out the lighting in the piece a bit. Firstly create a new layer by going to Layer>New>Layer and then grabbing your brush tool at a medium size set the blending mode to Linear Dodge and then use a bright color ex.yellow or white to fill in the lighting gaps on the left hand side of the image, play around with the strength of the brush to determine how bright you want the actual brushing to be.
Next create another new layer and then set the blending mode to Linear Dodge now with the same brush choose a Soft Green (#c1b568) and brush it along the side of her eye, above her cheek.
Next create another new layer and set the blending mode to Linear Dodge and now using a bit larger brush with the color Pink(#c03369) brush on the bottom of the image to equal the pink at the bottom. You should have something like this.
Now create a new layer by going to Layer>New>layer and then grabbing your brush tool and picking a nice splatter brush to use. Now brush on the back of her neck with the splatters moving away from her. Now hide that layer and create a new layer. Now go to Image>Apply Image and then unhide the layer that you previously hid that contains the splatter brushing now with the new applied image layer selected press (Ctrl + G) or right click on the layer and select Create Clipping mask. Now grab your Move tool (V) and then move the image around, you will see the image moving around within your splattered brush. Move the image around until you are totally satisfied with it.
Now Create a New another New Layer and select your Brush tool, but a normal Large soft brush ex 900px now select a soft blue color(#00acec) and brush on the bottom of the image on the right hand side, Now select Pink (#c03369) and brush on the left hand side, after you have brushed set the Blending mode of the layer to Linear Dodge.
Now go to Layer>New Adjustment Layer>Black and White and then hit OK. Set the Opacity to 53% and then erase parts of the layer that cover her face and the colors on the bottom. You should have something like this.
We will start off by going to Layer>New Adjustment Layer>Gradient Map and then use the default black to white gradient and set the blending mode to Multiply and then erase the sections that you don’t want part of the gradient map.
Now in this section grab your Polygonal Lasso Tool (Shift + L) and then make a selection in the upper section of the piece that runs 45 degrees like seen below.
Now create a New Layer by going to Layer>New>Layer and then grab your gradient tool and set the gradient- white to nothing. And then drag your gradient tool from the top right to the bottom left within the selection then deselect the selection by going to Select>Deselect and then change the blending mode of your layer to Overlay and the Opacity to 58%. Now repeat that process about another two times putting them where you want them to be and where it suites your image.
Now use the same scatter brush technique that you used in STEP 5 and Create a New Layer and fill it with Black then set the Blending mode to Color Dodge and opacity to 82% and then use a White scatter brush, a bit larger than the previous one though. Brush along your exposure lines and erase the parts you don’t like.
Now create a new layer by going to Layer>New>Layer and then go to your brush tool and select a 19px hard brush and then grab your pen tool (P) now drag a line on your earlier copied face layers and then stroke that layer with simulate pressure, offset it a little bit though. Set the Blending mode of the layer to Overlay and now repeat that process on the other edges of the copied piece.
You should have something like this:
Create a New Layer and fill it with black. Set the Blending mode to Linear Dodge and Opacity to 60% now grab a Large Soft Brush and use the color Blue(#00acec) and brush on the bottom right hand side of the image and then use a soft Pink(#ff74d1) brush in the middle on the right hand side. You can use the colors that match your image if you aren’t following my exact tutorial.
Create a New Layer and then go to Image>Apply Image now go up to Filter>Liquify then use the Twirl Brush in the Liquify toolset and create random swirls and motions. Hit OK when you’re done and then set the Blending mode of the Layer to Lighter Color and erase all the parts that you do not want present in the image.
Now create another new layer and then set the Blending Mode to Color Dodge and grab your Brush Tool and select a Large Soft Brush and use the color Purple(#3b2d82) to light up the top of her head on the right hand side. You should have something like this.
Create a Gradient map by going to Layer>New Adjustment Layer>Gradient Map and use the Default Black to White Gradient and set the Blending Mode to Luminosity and the Opacity to 44% Now create a new layer and use a Soft Pink brush(#ff4dd7) and brush on her check for some shine.
Now Create a new Layer by going to Layer>New>Layer and then setting your brush size to 10px and then grabbing your pen tool. Now Drag a small line with your pen tool and then stroke that line with Simulate Pressure and delete the path by right clicking>Delete Path. Now with the Layer selected hit (Ctrl + J) or right click on the layer and hit Duplicate Layer. Now use the Free Transform (Ctrl+T) tool to rotate the stripe 90 degrees. On the same layer grab your brush tool and increase the size of the brush and use it to make a dot in the middle of the corresponding stripes. Now press (Ctrl + E) to merge one layer down. Now move the star around to where you want to place it. Now duplicate it by right clicking on the layer and pressing Duplicate Layer and then move it around to another place. Play around a bit by duplicating them and resizing them to suite your needs. You should have something similar to me below.
Last but not least create a new gradient map by going to Layer>New Adjustment Layer >Gradient map and choose the blue(#0a00b2) to Red(#ff0000) to Yellow(#fffc00) gradient and then hit OK. Set your Blending mode on the Layer to Soft Light and The Opacity to 18% and you’re done.
Thanks for reading the tutorial.
About the Author
3D Spiral Flash Gallery Giveaway Contest
Under Articles ( Author: Photoshop Lady )
The 3D Spiral is a Flash gallery component that displays images on an interactive 3D rotating spiral using the Papervision3D engine.
To obtain different layouts by changing the height and width of the spiral, the viewer can scroll, move up/down and zoom the spiral freely. It includes customizable opening and closing animation styles and a built-in preloader for seamless transitions between thumbs and large images.
Flashloaded offers Photoshop Lady 3 free 3D Spiral Flash Gallery Licenses and each of this currently costs $49.95. We have decided to give away these to our readers. I am sure you would love it and benefit from it a lot.
To participate, you can simply make a post on our Photoshop Forums. And we will draw 3 outstanding posts on 18th Nov 2008. Act quickly and don’t miss this chance to win the new generation flash gallery component.
VIP Downloads of Over 2500 Top Quality Design Resources
PhotoshopLady works in partnership with WeGraphics to provide to his community the best design resources at the lowest price. By joining the premium membership, you will get access to ready-to-use sets of brushes, vectors, textures, icons and other awesome stuff paying only 7$/month or 49$/year. The arsenal of design items currently contains more than 2500 resources, with 3 new sets weekly added. And there’s a discount for Photoshoplady’s friends! By using the coupon ‘wp-pslady‘, you will get a 10% off on the yearly accounts (both recurring billing and pre-paid membership).
Want to learn more? Visit WeGraphics.net
Hello Everyone here we have a design/illustration tutorial. We are working on a label for a Micro brew beer.
First of all, I will go through all the process and how I came up with a rough sketch of what my character would look like.
Here is a sketch on paper with a permanent marker line art. Scan your work and keep the file on a 300dpi resolution. The bigger the better, that way scaling down works best! The sketch was done on red so we could easily separate the line art from the sketch. How? Super easy! At first label your layer by double clicking on it.
You can either do it by ctrl+click on PC or command+click on MAC and select your sketch layer, once you have the marching ants you go to the channels tab and click on your red channel.
You copy that channel layer ctrl+c on PC command+c on MAC. And you click again on you composite channel (RGB) to select them all. You go back to your layers panel and paste your red channel as a layer ctrl+v on PC or command+v on MAC. Name your new layer LINE ART.
Let’s go to the levels adjustment ctrl+L on PC or command+l o MAC and tweak your sliders so you get a clean black and white image. Try and get all the grays out. Easy! Now to get rid of the white and keep a clean lien art! OK so we can get rid of that first sketch of ours or keep it if you like to have the history. I personally like to have all my layers at the end and see how much the image changed from beginning to end. (I know many of your might be dying about the left eye of the ninja but I’m getting there!) Ok, now we get rid of the white background. Hide all your layers but your line art by doing alt+click on PC or optn+click on MAC over the little eye icon on your layer. We open the blending options of our LINE ART layer by double clicking on the space next to the name or by simply going to your “FX” button.
After that, selecting blending options. There you’ll have 3 blocks and the third one is the one we want: “Blend If: Gray” Here you want to slide the white triangle to the left until the white is totally gone! Click OK when done.
Great! Now we need to lock those changes so we need to press ctrl+click on PC or command+click on MAC on the create new layer icon so that the new layer appears under our line art layer. Then select both and press ctrl+e on PC or command+e on MAC to merge both layers onto one and keep it in transparency. Awesome! Now we can finally duplicate that eye and get ready to color it.
Once OK, we can go to the painting process. Create a new layer under the line art and layout all your flat colors.
it is time to work on your lights and shadows. Use brighter tones of the same layout colors for the highlights and darker for your shadows. Once you finish, you should have something like this:
Now we can take this great drawing to the next level. We are going to color the line art. What? my precious clean clack lines? yes! to do this you want to lock the transparency on the line art by clicking on this icon:
Now it is coloring time. Choose the darkest color of the shadow per section of your character. Let’s say you are working on the hoodie of the ninja. Select your darkest value with the eyedropper tool and go a little darker than that. Why? just so that the line art doesn’t blend with the shadows. Once you have that color start brushing in! Your final illustration would look a little like this:
Since you have done with the character. It is time to work on the label. Setup your size and resolution on a new document. Remember 300+dpi is best if you want to print. Firstly, we set the background color in green. Press alt+backspace on PC or option+backspace on MAC to fill the layer with your choice of color.
With a soft brush ,the dodge and the burn tool you need to work out some shadows and lights. Then choose greens with the same dodge and burn but with a textured brush as below.
Now we go to work on the starburst effect. Create a new layer; and then,draw line and dark gray rectangles like this:
Go to the main menu and select “Filters” then “Distort” and lastly “Polar Coordinates” and use RECTANGULAR TO POLAR. BAM! Starburst. Now lower the opacity to about 50% and change the blend mode to “Overlay”.
It’s time for the Ovals. Firstly, we create our oval in a dark green. And then apply the following layer styles and apply the following settings as below:
We duplicate the layer by pressing ctrl+j on PC or command+j on MAC. Then change the color to a darker green and adjust the stroke settings to:
And then, add your illustration layer
Apply the following outer glow layer style to make it POP:
And then, we can add logo, flavor and text into the recipe!
Use the same idea to create the template as this:
Download PSD Source File
Sometimes, you may find it difficult to look for some of the highest quality photoshop tutorials using search engines. As most of time, almost all tutorials would label themselves to be good, high quality or even the best photoshop tutorial you can find. When searching through all these tutorials, your time is wasted.
In order to save your time, Photoshop Lady come up with 30 Best Photoshop Abstract Effect Tutorials of All Time. These are selected from our Photoshop users and readers.
“Skull” is Colombian digital artist Santiago Betancur Salazar’s last project. Salazar has his own website, which exhibits his fabulous works with different styles. The reason why he presents his “Skull” here is he loves skull, so he shares his works.
Photos belows generally show Salazar’s working process with “Skull” by Photoshop. Skull itself is terrific enough, and Salazar created this “Skull” with creepy grey metal effects. The exquisite vein and muscle details prove Salazar’s skills and attitude. No matter seeing from the front or from the profile, Salazar’s Skull is naturally mixed together with its background, a grey metal skull emerging from its gray tenacious and unbreakable background.